Oval Gear Flow Meter
The LC series oval gear flow meter is equipped with a pointer and a character wheel accumulation device, which can directly display the cumulative flow rate of liquid flowing through the pipe on site.
- Model: WK-LC
- MOQ: 1PCS
- Payment: Wire transfer/ Credit card
- Lead Time: 5-7 days
- OEM/ODM: Available
Description
Oval gear flow meter can be customized according to your requirements. Different liquid (acid, alkali, salt, oil, organic solution, etc.) flow meter bodies can be made of different materials. Adding a signaling device to the counting mechanism and matching the electronic display instrument can realize centralized remote control of cumulative, quantitative and instantaneous flow. Adding a liquid crystal digital counter can display instantaneous/cumulative flow on site, and realizing remote transmission of multiple signals (pulse/current/communication) at the same time. Adding a radiator or gear teeth can measure high-temperature and highly viscous liquids. Thermal insulation jackets can be installed to conduct heat tracing and insulation of the flow meter.
Conventional accuracy ±0.5%, high-precision model can reach ±0.2%;
Good repeatability, 0.5 level accuracy repeatability <0.17%, 0.2 level accuracy repeatability <0.07%; Mechanical structure performance is more stable, viscosity adaptability is stronger, and temperature resistance is higher;
The range is large, and the starting flow is small. Normal measurement can be achieved even below the lower limit of flow;
Strong viscosity adaptability, viscosity measurement range can reach 0.3~2000 mPa.s;
Wide temperature resistance range, temperature adaptation range can reach-40~+300℃.
Oval gear flow meter of iron casting type, cast steel type and stainless steel type
| LC—A Iron casting type | LC—B Stainless steel type | LC—E Cast steel type | ||
| Nominal pressure MPa | 1.6 | 1.6, 2.5, 4.0, 6.3 | 1.6, 2.5, 4.0, 6.3 | |
| Temperature range ℃ |
Conventional pointer type: -20~+80；High-temperature pointer type: -20~+200； Conventional LCD type: -20~+60；High-temperature LCD type: -20~+150； |
|||
| Precision level | 0.5% | |||
| Caliber (mm) | Viscosity: 0.6—2mPa.s | Viscosity: 2—200mPa.s | ||
| 10 | 0.2-0.4 m3/h | 0.08—0.4 m3/h | ||
| 15 | 0.6-1.5 m3/h | 0.3—1.5 m3/h | ||
| 20 | 0.8—3 m3/h | 0.6—3 m3/h | ||
| 25 | 1.2—6 m3/h | 0.8—6 m3/h | ||
| 40 | 5—15 m3/h | 3—15 m3/h | ||
| 50 | 6—24 m3/h | 4—24 m3/h | ||
| 65 | 10—40 m3/h | 8—40 m3/h | ||
| 80 (light type) | 10—40 m3/h | 8—40 m3/h | ||
| 80 (heavy type) | 15—60 m3/h | 10—60 m3/h | ||
| 100 | 30—100 m3/h | 15—100 m3/h | ||
| 150 | 45—190 m3/h | 34—190 m3/h | ||
| 200 | 68—340 m3/h | 56—340 m3/h | ||
Oval gear flow meter of high viscosity type
| LC—NA High-viscosity iron casting type | LC—NE High-viscosity cast steel type | LC-NB High-viscosity stainless steel type | ||
| Nominal pressure(MPa) | 1.6 | 1.6、2.5、4.0、6.3 | 1.6、2.5、4.0、6.3 | |
| Temperature range ℃ |
Conventional pointer type: -20~+80；High-temperature pointer type: -20~+200； Conventional LCD type: -20~+60；High-temperature LCD type: -20~+150； |
|||
| Precision level | 0.5% | |||
| Flow range m3/h | ||||
| Caliber (mm) | Viscosity: 200—1000mPa.s | Viscosity: 1000-2000mPa.s | ||
| 10 | 0.04—0.3 m3/h | 0.03-0.2 m3/h | ||
| 15 | 0.2—1.0 m3/h | 0.1-0.7 m3/h | ||
| 20 | 0.4—2.1 m3/h | 0.25-1.5 m3/h | ||
| 25 | 0.6-4.2 m3/h | 0.6-3 m3/h | ||
| 40 | 2.1—10.5 m3/h | 1.0-7.5 m3/h | ||
| 50 | 2.4-16.8 m3/h | 2-12 m3/h | ||
| 65 | 6-28 m3/h | 4-20 m3/h | ||
| 80 (light type) | 6-28 m3/h | 4-20 m3/h | ||
| 80 (heavy type) | 8-42 m3/h | 6-30 m3/h | ||
| 100 | 10-70 m3/h | 10-50 m3/h | ||
| 150 | 27-133 m3/h | 19-95 m3/h | ||
| 200 | 48-238 m3/h | 34-170 m3/h | ||
High-precision oval gear flow meter (precision: 0.2%)
| LC—A Iron casting type | LC—B Stainless steel type | LC—E Cast steel type | ||
| NominalpressureMPa | 1.6 | 1.6、2.5、4.0、6.3 | 1.6、2.5、4.0、6.3 | |
| Temperature range ℃ |
Conventional pointer type: -20~+80；High-temperature pointer type: -20~+200； Conventional LCD type: -20~+60；High-temperature LCD type: -20~+150； |
|||
| Precision level | 0.2% | |||
| Flow range m3/h | ||||
| Caliber (mm) | 0.6—2 mPa.s | 2—200 mPa.s | ||
| 10 | 0.2—0.4 m3/h | |||
| 15 | 0.5—1.5 m3/h | |||
| 20 | 1.5—3 m3/h | 1—3 m3/h | ||
| 25 | 3—6 m3/h | 1.2—6 m3/h | ||
| 40 | 8—15 m3/h | 5—15 m3/h | ||
| 50 | 12—24 m3/h | 8—24 m3/h | ||
| 65 | 20—40 m3/h | 10—40 m3/h | ||
| 80 (light type) | 20—40 m3/h | 10—40 m3/h | ||
| 80 (heavy type) | 30—60 m3/h | 15—60 m3/h | ||
| 100 | 40—100 m3/h | 20—100 m3/h | ||
| 150 | 90—190 m3/h | 56—190 m3/h | ||
| 200 | 170—340 m3/h | 68—340 m3/h | ||
High-precision and high-viscosity oval gear flow meter (precision: 0.2%)
| LC—NA High-viscosity iron casting type | LC—NE High-viscosity cast steel type | LC-NB High-viscosity stainless steel type | ||
| NominalpressureMPa | 1.6 | 1.6, 2.5, 4.0, 6.3 | 1.6, 2.5, 4.0, 6.3 | |
| Temperature range ℃ |
Conventional pointer type: -20~+80; High-temperature pointer type: -20~+200; Conventional LCD type: -20~+60; High-temperature LCD type: -20~+150; |
|||
| Precision grade | 0.2% | |||
| Flow range m3/h | ||||
| Caliber (mm) | Viscosity: 200—1000mPa.s | Viscosity: 1000-2000mPa.s | ||
| 10 | 0.08—0.3 m3/h | 0.06-0.2 m3/h | ||
| 15 | 0.3—1.0 m3/h | 0.2-0.7 m3/h | ||
| 20 | 0.6—2.1 m3/h | 0.5-1.5 m3/h | ||
| 25 | 1-4.2 m3/h | 0.8-3 m3/h | ||
| 40 | 3—10.5 m3/h | 2-7.5 m3/h | ||
| 50 | 4-16.8 m3/h | 3-12 m3/h | ||
| 65 | 8-28 m3/h | 6-20 m3/h | ||
| 80 (light type) | 8-28 m3/h | 6-20 m3/h | ||
| 80 (heavy type) | 10-42 m3/h | 8-30 m3/h | ||
| 100 | 15-70 m3/h | 12-50 m3/h | ||
| 150 | 34-133 m3/h | 30-95 m3/h | ||
| 200 | 56-238 m3/h | 50-170 m3/h | ||
